Surprisingly Stomp-able Soft Switches | Hackaday

2022-11-24 00:46:53 By : Ms. Ann Hu

Competition sure brings out the brute in people, doesn’t it? So what do you do when you need a bunch of switches you can let people fist-pound or stomp on repeatedly without them taking damage? You could look to the guitar pedal industry and their tough latching switches, or you could simply build your own smash-resistant buttons as [wannabemadsci] has done.

The main thing about these switches is that they aren’t easily destroyed by shoes or angry fists. That’s because the shiny red push-me part of the button is made by cutting a foam ball in half. Lighting Tower

Surprisingly Stomp-able Soft Switches | Hackaday

Not easily crush-able Styrofoam, mind you — squishy, coated foam like an indoor football. This is mounted to the top of a sandwich made of hardboard and a couple pieces of easily-compressible foam from craft paintbrushes.

A brass washer is mounted to the middle of both pieces of hardboard, and these have wires soldered to them to read button presses. Then it’s just a matter of hooking it to a microcontroller like any other momentary.

There are all kinds of things you could cut in half for the top, like maybe tennis balls. Or, do what [Sprite_TM] did and use inverted plastic bowls.

Anyhow, yes. This is precisely how certain kinds of Devices are Improvised.

It’s an Improvised Entertainment Device!

I see what you did there :)

Basically how I made hard pads for DDR, except I used 2 metal sheets on top and bottom.

Nice. Still not convinced it’d last that long in a truest abusive environment like a school or public space – foam balls ultimately aren’t that durable.

I’d probably go for something with no moving parts – a sheet of hardboard with a piezo mounted under it, to detect the noise of a stomp. I had surprising success years ago detecting taps across a desk with two piezos – probably inspired by an old HAD article…

Well there are those sensors cars drive over to let the gas station know you need a fill-up. Basically a rubber hose with a pressure sensor.

Ah yes, the ‘ding hose’! One of my favorite thrift stores has one to draw out the workers when you want to donate.

Cool concept, but I would also like to see it after a month of serious use. If people will stamp on it with their feet, there will be a significant sideways load too and I don’t think the foam, glue and wires will hold, I wonder what gives first.

However, the concept of the ball being a button is far out brilliant.

There are commercial buttons avaliable for flushing toilets that are floor mounted. They survive quite a bit of stomping. It’s the black stretchy rubber kind, has an pneumatic tube inside that triggers the flush when user pinches it.

This would be a good HA prize, “Build the World’s toughest I/O device.”

Seacan container supported on another one with a 3 block high breezeblock wall… nice thick arm sized steel cable welded to each…

When the circuit is completed there has been a nuclear explosion overhead.

I had to buy something like this for a work project. Only thing: it had to be totally insulated for a medical application.

The solution was a rubber bulb as in the illustration above, but with a rubber hose, leading to a pressure switch in the equipment. Absolutely no wires needed, just a rubber dome and a tube. Step on it and the switch in the equipment activated.

In 2015 I made an analog quiz button system with huge half-round push button. If I ever think of these then I may have save 50 buck off the budget.

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Surprisingly Stomp-able Soft Switches | Hackaday

Signal Lamp By using our website and services, you expressly agree to the placement of our performance, functionality and advertising cookies. Learn more