Machine Learning Can Identify New Polymer Membranes

2022-07-30 07:30:08 By : Ms. Jenny zhai

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

In the industrial setting, polymer membranes are frequently employed to separate gases like CO2 from flue gas and methane from natural gas. Over the years, scientists have studied different polymers to increase their permeability and usefulness, but up until now, they have not been able to rapidly and effectively test them all.

A novel approach to using machine learning (ML) to test and discover new polymer membranes has been discovered by the University of Connecticut Assistant Professor of Mechanical Engineering Ying Li, University of Connecticut Centennial Professor of Chemical and Biomolecular Engineering Jeff McCutcheon, University of Connecticut researchers Lei Tao and Jinlong He, and researcher Jason Yang from the California Institute of Technology.

This methodology was recently published in Science Advances.

After a thorough investigation, the study team remarked, “In the decades of technological development in the membrane science field, design of new membrane materials has been, and remains, a largely trial-and-error process, guided by experience and intuition. Current approaches generally involve tuning chemical groups to increase affinity and solubility towards the desired gas or incorporating greater free volume to increase overall diffusivity.”

Computational models can be used to forecast membrane performance instead of time-consuming trials. However, they either lack precision due to the streamlined approximations or are excessively costly. The researchers created a precise strategy for applying ML techniques to find novel, high-performing polymers to overcome this deficiency.

The researchers linked membrane chemistry to performance using deep learning on a limited dataset using numerous fingerprint characteristics and fixed chemical descriptors.

The study discovered that deep neural networks performed well due to the usage of ensembling, which integrates prediction from numerous models. RF (Random Forest) models are often considered to perform well on small data sets.

The scientists also discovered that the ML model could find thousands of polymers whose performance was projected to be better than the Robeson upper bound, a measure used to quantify the trade-off between permeability and selectivity for polymer gas-separation membranes.

The industry would also be able to undertake gas separations with a greater throughput while retaining a high level of selectivity, thanks to newly found polymers with ultrahigh permeability.

The researchers further stated, “Ultimately, we provide the membrane design community with many novel high-performance polymer candidates and key chemical features to consider when designing their molecular structures. Lessons from the workflow demonstrated in this study can likely serve as a guide for other materials discovery and design tasks, such as polymer membranes for desalination and water treatment, high-temperature fuel cells, and catalysis.”

They concluded, “With the continual improvement of ML techniques and an increase in computing power, we expect that ML-assisted design frameworks will only gain popularity and deliver increasingly substantial results in materials discovery for a wide range of applications.”

The Air Force Office of Scientific Research (FA9550-20-1-0183; program manager: M.-J. Pan), the National Science Foundation (CMMI-1934829 and CAREER Award CMMI-2046751), 3M’s Non-Tenured Faculty Award, and the National Alliance for Water Innovation (NAWI), under Funding Opportunity Announcement Number DE-FOA-0001905 of the U.S. Department of Energy, provided funding in full or in part for this project.

Yang, J., et al. (2022) Machine learning enables interpretable discovery of innovative polymers for gas separation membranes. Science Advances. doi:10.1126/sciadv.abn9545.

Do you have a review, update or anything you would like to add to this news story?

At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.

At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.

At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.

Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.

Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.

Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022