Customized Hard Alloy H6 Rod-Tungsten Rod

Product DescriptionTungsten carbide rods (bars) has many excellent characteristics such as high hardness and strength, good wear and corrosion resistance and salient stability under high temperature. It can be used to cut cast iron, nonferrous metals, plastics, chemical fiber, stainless steel and high Manganese steel, etc; and c

Featured Products

Product Description

Tungsten carbide rods (bars) has many excellent characteristics such as high hardness and strength, good wear and corrosion resistance and salient stability under high temperature. It can be used to cut cast iron, nonferrous metals, plastics, chemical fiber, stainless steel and high Manganese steel, etc; and can make drilling tools, mining tools and wear parts etc.
YG6 YG8 K20 thread polished grinding sintered blank rough TC rods with hole - Solid Cemented Tungsten Carbide Rod

Tungsten carbide rods (bars) available as blanks or h6 precision ground with chamfer-on-one-end. Our tungsten carbide rods are manufactured as standards with one or two holes, straight or twisted to a 30 degree helix, or solid with no holes.
The sizes can be customized as your requirements.
Blank and polished can be chosen.

The round bar is press molded by molding and extrusion.
 The cemented carbide round bar is sintered by a vacuum integrated furnace or a high-pressure sintering furnace, and has high overall performance and no porosity.
Blank round bar, or finish and polish the outer diameter of the round bar according to any tolerance. Common tolerances are H6, H7, h6, h7, -0.005, etc.
The round end of the round bar is chamfered.
 Carbide round bars are suitable for the processing of materials such as general steel, cast iron, stainless steel, heat resistant steel, nickel base and titanium alloy. Recommended for twist drills,

General purpose tool materials such as end mills and taps.

Round rods with diameters from 0.3 to 40mm are available in lengths up to 400mm. We can also provide products according to your drawings.
Product further:
1. High-purity raw material fine tungsten carbide and cobalt powder are used as raw materials.
2, using a tilting ball mill, high-precision automatic press, spray tower, dry isostatic press, overpressure sintering furnace for standardized production.
3. Unique new process: vacuum high temperature and high pressure sintering. The product is pressure sintered in the final stage, which greatly reduces the porosity, improves the compactness, and greatly improves the mechanical properties of the product.


Advantages: made from sub-micron and ultra-fine WC with homogeneous property, good wear resistance high toughness.
Applications: widely used in end mills, drills, micro=drills, micro-mills etc.

Grade:
GradeISO rangeCobalt %Density
g/cm3
Hardness
HRA
TRS
N/mm2
YG8K30814.75-14.8589.52300
YG6K20614.8-14.990.52200
YG6XK10614.8-14.991.52000
YL10.2K301014.45-14.5591.82420
YG13XK30-K401314.25-14.35882600
YG15K401514.00-14.2872800

 

Our Advantages

Customized Cemented Carbide H6 Rods - Tungsten Rods

Customized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten RodsCustomized Cemented Carbide H6 Rods - Tungsten Rods

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours