888-776-0942 from 8 AM - 10 PM ET
DUBLIN , May 11, 2022 /PRNewswire/ -- The "Tangential Flow Filtration Market by Product (System, Membrane Filter), Material (PES, PVDF, PTFE), Technique (Ultrafiltration), Application (Final Product Processing, Raw Material Filtration), End User (Pharma, Biotech), Region - Global Forecast to 2027" report has been added to ResearchAndMarkets.com's offering.
The global tangential flow filtration market is projected to USD 2.8 billion by 2027 from USD 1.5 billion in 2022, at a CAGR of 13.2% during the forecast period.
The rising advantages of tangential flow filtration over normal flow filtration, increasing adoption of single-use technologies, and growing R&D spending in pharma-biotech companies. On the contrary, the high capital investments for setting up new production facilities are expected to restrain the market growth. In 2021 the single-use systems segment accounted for the largest share of the tangential flow market The tangential flow filtration market is segmented into single-use systems, reusable systems, membrane filters, and filtration accessories on the basis of products. The single-use systems segment in 2021, dominated the market with the largest share and is anticipated to grow at the highest CAGR during the forecast period owing to the minimal chances of cross-contamination risks associated with these systems The microfiltration techniques dominated the market the largest share of the technique segment in 2021 On the basis of technique, the tangential flow filtration market is segmented into microfiltration, ultrafiltration, nanofiltration, and other techniques. The microfiltration segment dominated the market with highest market share in 2021. Several advantages of microfiltration over other techniques, for instance, low operating pressure requirement, ease of usage coupled with reduced energy consumption, cost-effectiveness, elimination of energy-consuming phases such as evaporation along with the requirement of limited manual actions are some of the key factors increasing the market growth for the segment The final product processing application accounted for the largest market share of this market in 2021 Based on application, the tangential flow filtration market is segmented into final product processing, raw material filtration, cell separation, water purification, and air purification. The final product processing segment is further divided into API filtration, protein purification, vaccine and antibody processing, formulation and filling solutions, and viral clearance. The raw material filtration segment is further divided into media & buffer filtration, prefiltration, and bioburden reduction. In 2021, the final product processing segment accounted for the largest share of the global tangential flow filtration market. The rapidly growing biopharmaceutical industry and increased generics and biologics production are the key growth drivers for this application segment.
Asia Pacific : The fastest-growing region in the tangential flow filtration market The tangential flow filtration market is segmented into North America , Europe , Asia Pacific , Latin America (LATAM) and Middle East and Africa (MEA). The Asia Pacific market is expected to register the highest CAGR during the forecast period. ). The Asia Pacific market is expected to register the highest CAGR during the forecast period. Some of the major factors contributing to the growth of the Asia Pacific market are the growing prevalence of viral diseases, increasing R&D spending on biopharmaceutical projects, expansion of production of generics, and biotechnology industry growth in developing countries.
Key Topics Covered: 1 Introduction 2 Research Methodology 3 Executive Summary
4 Premium Insights 4.1 Tangential Flow Filtration Market Overview 4.2 North America : Tangential Flow Filtration Market, by Product and Country (2022) 4.3 Tangential Flow Filtration Market Share, by Application, 2022 Vs. 2027 4.4 Tangential Flow Filtration Market Share, by Technique, 2022 4.5 Tangential Flow Filtration Market: Geographic Growth Opportunities
5 Market Overview 5.1 Introduction 5.2 Market Dynamics 5.2.1 Drivers 5.2.1.1 Growing Advantages of Tangential Flow Filtration Over Normal Flow Filtration 5.2.1.2 Rising R&D Spending in Pharmaceutical & Biotechnology Industries 5.2.1.3 Increasing Adoption of Single-Use Technologies 5.2.1.4 Increased Adoption of Good Automated Manufacturing Practice (Gamp) 5.2.2 Restraints 5.2.2.1 High Capital Investments for New Production Facilities to Limit the Entry of Small Players 5.2.3 Opportunities 5.2.3.1 Emerging Economies Offer Lucrative Growth Opportunities 5.2.3.2 Rising Therapeutic Applications of Recombinant Proteins 5.2.4 Challenges 5.2.4.1 Increased Complexities Introduced by the Interaction of Charged Excipients and Proteins to Restrict the Market Growth 5.2.4.2 Difficulty in the Survival of Small Players and New Entrants 5.3 Ranges/Scenario 5.4 Impact of COVID-19 on the Tangential Flow Filtration Market 5.5 Trends/Disruptions Impacting Customer's Business 5.6 Pricing Analysis 5.7 Value Chain Analysis 5.8 Supply Chain Analysis 5.9 Ecosystem Analysis 5.10 Patent Analysis 5.11 Key Conferences and Events 5.12 Regulatory Analysis 5.12.1 United States Pharmacopoeia (Usp) Class Vi 5.12.2 Current Good Manufacturing Practice 5.13 Porter's Five Forces Analysis 5.14 Key Stakeholders and Buying Criteria 5.14.1 Key Stakeholders in Companies and Their Influence on the Buying Process 5.14.2 Key Buying Criteria for Tangential Flow Filtration Products
6 Tangential Flow Filtration Market, by Product 6.1 Introduction 6.2 Single-Use Systems 6.2.1 Reduced Need for Product Validation and Minimized Cross-Contamination Risks Are the Advantages of Single-Use Systems 6.3 Reusable Systems 6.3.1 Reusable Systems Are Expected to Grow at a Slower Rate During the Forecast Period 6.4 Membrane Filters 6.4.1 Cassettes 6.4.1.1 The Cassettes Segment Dominates the Membrane Filters Market 6.4.2 Capsules & Cartridges 6.4.2.1 Increased Flow Path and Higher Efficiency of Hollow-Fiber Filters Have Contributed to the Significant Market Share of Capsules & Cartridges 6.5 Filtration Accessories 6.5.1 Rising Adoption of TFF Systems and Membrane Filters Will Drive the Use of Associated Accessories
7 Tangential Flow Filtration Market, by Membrane Material 7.1 Introduction 7.2 Pes 7.2.1 High Reliability and Wide Applications Have Ensured the Market Dominance of Pes 7.3 Polyvinylidene Difluoride (Pvdf) 7.3.1 Adherence of Pvdf Material to Fda, Usp, and Eec Requirements to Increase Demand Among End-users 7.4 Nylon 7.4.1 Increased Endotoxin Adsorption Capacity of Nylon Filters to Drive Its Demand in Pharmaceutical Applications 7.5 Polytetrafluoroethylene (Ptfe) 7.5.1 Wide Advantages of Ptfe Membrane Material to Support Market Growth 7.6 Mixed Cellulose Ester & Cellulose Acetate (Mce & Ca) 7.6.1 Mce Membranes Are Chemically Inert and Are Used in Analytical and Research Applications 7.7 Polycarbonate Track Etch (Pcte) 7.7.1 Pcte Membrane Filters Are Used in Cell Biology and Analytical Testing Applications 7.8 Regenerated Cellulose 7.8.1 Wide Applications in Upstream Processing to Boost Market Growth 7.9 Other Membrane Materials
8 Tangential Flow Filtration Market, by Technique 8.1 Introduction 8.2 Microfiltration 8.2.1 Microfiltration is Used for Harvesting Cells in Upstream Bioprocessing 8.3 Ultrafiltration 8.3.1 Ultrafiltration is Used in the Biopharmaceutical Industry for Cell Harvesting After Fermentation 8.4 Nanofiltration 8.4.1 High Energy Consumption Hinders Market Growth 8.5 Other Techniques
9 Tangential Flow Filtration Market, by Application 9.1 Introduction 9.2 Final Product Processing 9.2.1 Active Pharmaceutical Ingredient (API) Filtration 9.2.1.1 Need for Continuous Filtration of Apis to Propel Market Growth 9.2.2 Protein Purification 9.2.2.1 Increasing Demand for Protein Therapeutic Drugs to Drive the Market 9.2.3 Vaccine & Antibody Processing 9.2.3.1 Rising Incidence of COVID-19 to Drive the Market for Vaccine and Antibody Processing 9.2.4 Formulation & Filling Solutions 9.2.4.1 Growing Need for Aseptic Filling and Bioburden Reduction to Support Market Growth 9.2.5 Viral Clearance 9.2.5.1 Growing Manufacturing Volumes to Propel Market Growth 9.3 Raw Material Filtration 9.3.1 Media & Buffer Filtration 9.3.1.1 Growth in the Manufacturing of Biopharmaceuticals to Drive the Market 9.3.2 Prefiltration 9.3.2.1 Prefiltration Removes Contaminants from Fluid Streams Through Direct Interception and Sieving 9.3.3 Bioburden Testing 9.3.3.1 Bioburden Testing is Mandatory for Pharmaceutical Production 9.4 Cell Separation 9.4.1 Growing Demand for Personalized Medicine to Drive the Market 9.5 Water Purification 9.5.1 Purified Water is Used for the Manufacturing of Pharmaceutical Drugs 9.6 Air Purification 9.6.1 Adoption of Gmp Practices to Drive the Market
10 Tangential Flow Filtration Market, by End-user 10.1 Introduction 10.2 Pharmaceutical & Biotechnology Companies 10.2.1 Pharmaceutical & Biotechnology Companies Are the Largest & Fastest-Growing End-users in the Market 10.3 Contract Manufacturing Organizations & Contract Research Organizations 10.3.1 Increasing Demand to Outsource the Production Function to Cmos & Cros is Supporting the Growth of this End-User Segment 10.4 Academic Institutes & Research Laboratories 10.4.1 Increasing R&D Expenditure is Supporting the Growth of this End-User Segment
11 Tangential Flow Filtration Market, by Region
12 Competitive Landscape 12.1 Introduction 12.2 Right-To-Win Approaches Adopted by Key Players 12.3 Market Share Analysis 12.4 Revenue Analysis 12.5 Company Evaluation Quadrant 12.5.1 Stars 12.5.2 Emerging Leaders 12.5.3 Pervasive Players 12.5.4 Participants 12.6 Competitive Benchmarking of Top 25 Players 12.6.1 Company Footprint (25 Companies) 12.6.2 Company Product Footprint (25 Companies) 12.6.3 Company End-User Footprint (25 Companies) 12.6.4 Company Regional Footprint (25 Companies) 12.7 Company Evaluation Quadrant: Start-Ups/SMEs 12.7.1 Progressive Companies 12.7.2 Starting Blocks 12.7.3 Responsive Companies 12.7.4 Dynamic Companies 12.8 Competitive Benchmarking of Startup/SME Players 12.9 Competitive Scenario and Trends 12.9.1 Deals 12.9.2 Other Developments
13 Company Profiles 13.1 Key Players 13.1.1 Merk Kgaa 13.1.2 Danaher Corporation 13.1.3 Sartorius Ag 13.1.4 Parker Hannifin Corporation 13.1.5 Repligen Corporation 13.1.6 Alfa Laval Corporate Ab 13.1.7 Andritz 13.1.8 Meissner Filtration Products, Inc. 13.1.9 Cole-Parmer Instrument Company, LLC 13.1.10 Solaris Biotechnology Srl (Acquired by Donaldson Company, Inc.) 13.1.11 Koch Separation Solutions 13.1.12 Sterlitech Corporation 13.1.13 Synder Filtration, Inc. 13.2 Other Companies 13.2.1 Pendotech 13.2.2 Artesyn Biosolutions 13.2.3 Microfilt India Pvt. Ltd. 13.2.4 Bionet 13.2.5 Sysbiotech Gmbh 13.2.6 Cobetter Filtration Equipment Co. Ltd. 13.2.7 Biotree 13.2.8 Formulatrix 13.2.9 Mantec Technical Ceramics Ltd. 13.2.10 Smartflow Technologies, Inc. 13.2.11 Tami Industries 13.2.12 Spf Technologies, LLC
For more information about this report visit https://www.researchandmarkets.com/r/pszdzz
Research and Markets Laura Wood , Senior Manager [email protected] For E.S.T Office Hours Call +1-917-300-0470 For U.S./CAN Toll Free Call +1-800-526-8630 For GMT Office Hours Call +353-1-416-8900 U.S. Fax: 646-607-1907 Fax (outside U.S.): +353-1-481-1716
More news releases in similar topics
Cision Distribution 888-776-0942 from 8 AM - 9 PM ET